Description: Manually or mechanically controlled hydraulic distributor Р35 is designed for distribution and control of work flow between generator (pump) and executive mechanisms (cylinder, hydro-motor, etc.). Relief valve is integrated therein.
Construction: Р35 is a mono-block distributor. Its body is made of cast iron EN-GJL300. Spool is made of carburized steel with hard chrome plating.
Mounting: Fixing is with two bolts M8.
| Ambient temperature |
-40C...+60C |
| Hydraulic liquid -mineral oil based/hydraulic oil |
|
| Viscosity |
12 ...800 mm2/s |
| Fluid temperature |
-15C...+80C |
| Filtration |
10 to NAS 1638 |
| Max operating pressure, P=250; T=50 bar |
A , B = 300 bar |
| Leakage |
10-15 cm3/min at 120 bar |
|
 |
Description: Manually or mechanically controlled hydraulic distributor Р38 is designed for distribution and control of work flow between generator (pump) and executive mechanisms (cylinder, hydro-motor, etc.). It is similar to P35, but has outlets P and T on the side of openings A and B.
Construction: Р38 is a mono-block distributor. Its body is made of cast iron EN-GJL300. Spool is made of carburized steel with hard chrome plating
Mounting: The distributor is fixed with two bolts M8
| Ambient temperature |
-40C...+60C |
| Hydraulic liquid -mineral oil based/hydraulic oil |
|
| Viscosity |
12 ...800 mm2/s |
| Fluid temperature |
-15C...+80C |
| Filtration |
10 to NAS 1638 |
| Max operating pressure, P=250; T=50 bar |
A , B = 300 bar |
| Leakage(A,B-T) |
15cm3/min at 120bar |
| Modification/ Spools |
with 1 to 7 |
|
 |
Description: Manually or mechanically controlled hydraulic directional control valve Р40 is designed for distribution and control of work flow between generator (pump) and executive mechanisms (cylinder, hydro-motor, etc.). It is manufactured with 1 to 7 plungers, with parallel or serial action, with common or individual back valve for each plunger, with or without safety valve
Construction: Р40 is a mono-block distributor. Its body is made of cast iron EN-GJL300. Plungers are made of carburized steel with hard chrome plating. Mounting
Mounting: The distributor is fixed with two bolts M8
| INTENDED FOR |
40L/M , 80L/M VALVES |
|
 |
Description: This control gives the possibility to operate, at the same time two spools with "+" movement. There are four standard versions. In recent times, the employment of joysticks has become common place in many industrial and manufacturing applications, such as; cranes, assembly lines, forestry equipment, mining trucks, and excavators. In fact, the use of such joysticks is in such high demand, that it has virtually replaced the traditional mechanical control lever in nearly all modern hydraulic control systems.
| Ambient temperature |
-40C...+60C |
| Hydraulic liquid -mineral oil based/hydraulic oil |
|
| Viscosity |
12 ...800 mm2/s |
| Fluid temperature |
-15C...+80C |
| Filtration |
10 to NAS 1638 |
| Max operating pressure, P=250; T=50 bar |
A , B = 300 bar |
| Leakage(A,B-T) |
18cm3/min at 120bar |
| Modification / Spools |
with 1 to 6 |
|
 |
Description: The hydraulic distributor Р80 is used for switching on/off and directing the working fluid between head flow generators (hydraulic pumps), head flow consumers (hydraulic cylinders, motors, etc.), and the tank. It is manufactured with up to 6 plungers with parallel or serial distribution
Construction: The hydraulic distributor Р80 is a mono-block distributor with manual control. The body is made of cast iron EN-GJL300, and the spools are made of carburized steel with hard chrome plating
Mounting: The distributor is fixed with 3 (three) bolts М8.
| Ambient temperature |
-40C...+60C |
| Hydraulic liquid -mineral oil based/hydraulic oil |
|
| Viscosity |
12 ...800 mm2/s |
| Fluid temperature |
-15C...+80C |
| Filtration |
10 to NAS 1638 |
| Max operating pressure, P=250; T=50 bar |
A , B = 300 bar |
| Leakage(A,B-T) |
30cm3/min at 120bar |
| Spool stroke |
10 mm,L12+/-10/6 |
| Modification/Spools |
with 1 to 4 |
|
 |
Description: The hydraulic distributor Р120 is used for switching on/off and controlling of the working fluid between head flow generators (hydraulic pumps), head flow consumers (hydraulic cylinders, motors, etc.), and the tanks of hydraulic systems of mobile machines (electrical and diesel forklifts, excavators, auto-cranes, etc.).
Construction: The hydraulic distributor Р120 is a mono-block type with manual control. The body is made of cast iron EN-GJL300, and the spools are made of carburized steel with hard chrome plating
Mounting: The distributor is fixed with 3 bolts М10
| Ambient temperature |
-40C...+60C |
| Hydraulic liquid -mineral oil based/hydraulic oil |
|
| Viscosity |
12 ...800 mm2/s |
| Fluid temperature |
-15C...+80C |
| Filtration |
10 to NAS 1638 |
| Max operating pressure, P=250; T=50 bar |
A , B = 300 bar |
| Leakage(A,B-T) |
15cm3/min at 120bar |
| Nominal flow (priority) |
2-25 l/min |
|
 |
Description: Manually or mechanically controlled hydraulic distributor 03PF40 is designed for distribution and control of work flow between generator (pump) and executive mechanisms (cylinder, hydro-motor, etc.). It has parallel action. Setting of flow rate is possible to the first spool and the remaining flow rate is used by subsequent spools
Construction: 03PF40 is a mono-block distributor. Its body is made of cast iron EN-GJL300. Spools are made of carburized steel with hard chrome plating
Mounting: The distributor is fixed with two bolts M8.
| Ambient temperature |
-40C...+60C |
| Hydraulic liquid -mineral oil based/hydraulic oil |
|
| Viscosity |
12 ...800 mm2/s |
| Fluid temperature |
-15C...+80C |
| Filtration |
10 to NAS 1638 |
| Max operating pressure, P=250; T=50 bar |
A , B = 300 bar |
| Pressure for authomatical release of spool |
70-140, bar |
| Leakage(A,B-T) |
20cm3/min at 120bar |
|
 |
Description: The hydraulic distributor Р81 is used for switching on/off and directing the working fluid between head flow generators (hydraulic pumps), head flow consumers (hydraulic cylinders, motors, etc.), and the tank. It has a setting from 70 to 140 bar for automatic switch-off. It is designed as a "log splitter valve".
Construction: The hydraulic distributor Р81 is a mono-block distributor with manual control. The body is made of cast iron EN-GJL300, and the spool is made of carburized steel with hard chrome plating.
Mounting: The distributor is fixed with 3 (three) bolts М8.
| One piece casting of high tensile cast iron |
|
| Parallel circuit with open or closed center operation |
|
| Built-in relief valve and load checks |
|
| Cylinder port relief and/or anti-cavitation checks optional |
|
| Ambient temperature |
-40C...+60C |
| Hydraulic liquid -mineral oil based/hydraulic oil |
|
| Viscosity |
12 ...800 mm2/s |
| Fluid temperature |
-15C...+80C |
| Filtration |
10 to NAS 1638 |
| Max operating pressure, P=320; T=5 bar |
A , B = 320 bar |
| Leakage(A,B-T) |
30cm3/min at 120bar |
| Spool stroke |
10 mm,L12+/-10/6 |
| Modification/Spools |
from 1-6/without 5 |
|
 |
Description: The valve monoblock is available in 1 up to 6 spool models.The valve housing is casted in chrome alloy cast iron.As standard the valve has two built-in load check valves in the inlet section, one check for
Construction: The valves have parallel circuits, thereby allowing operation of more several combinations to meet customer's requirements.A direct operate main relief differential valve is standard on all valves. The spools are made from hardened steel and chrome plated to secure maximum protection against corrosion and wear. It is used with air-cylinders for lorrytruck cranes.
Mounting: The monoblock valve can upon request be delivered with built-in port relief valves and/or anti-cavitation check valves.
| Ambient temperature |
-15C...+50C |
| Hydraulic liquid -mineral oil based/hydraulic oil |
|
| Max operating pressure, with/without L |
250 bar |
| Fluid temperature |
-30C...+80C |
|
 |
Description: RRV 3/2 or 3/3 circuit selector valve is designed to handle flow rates up to 120 l/min(32GPM) at a maximum pressure 250 bar(3630 psi).
Construction: The valve can be equipped with a number of different spools to provide 3/2 as well as 3/3 functions. The RRV can be controlled either by hand or any direct acting force on the spool in combination with spring center or detent mechanizm.
Mounting: The RRV... can be equipped with pneumatic and hydraulic control.
| Nominal flow rating |
16 l/min |
| Max operating pressure, P=250; T=10 bar |
A , B = 300 bar |
| Leakage (A,B>T) |
20 cm3/min at 120 bar |
| Hydraulic liquid |
Mineral base oil |
| Fluid temperature |
-20C to 80C |
| Ambient temperature |
-40C...+60C |
|
P40_EN_BG
P80
P120
3PF40
P35
P81
P81Rs
P38